Upgrade Your HVAC System With Top Picks for MERV 11 Furnace Air Filters

Enhance Your HVAC System with the Best MERV 11 Furnace Air Filters

Is Mold an issue at home?

You are not alone. Most houses that have HVAC’s are prone to mold growth which could be really hard to get rid of once they start to reek into your cabinets, rooms, cupboards. 

Their favorite is wood. It is a common material used by most homes in America. The problem is they tend to get into the air you inhale. 

Top MERV 11 HVAC furnace air filters might be exactly what you need. What makes them so great? They excel at trapping allergens such as pet dander, dust mites and guess what…mold.

This leads to an improvement in your indoor air quality. In turn, this safeguards your health.

Key Takeaways

1. These filters are ideal for an HVAC system upgrade.

3. Enhanced air quality results from these filters, removing more particles such as allergens and mites in the air.

4. Correct installation is critical to the optimal performance of AC, including accurate positioning and regular inspections.

5. Regular maintenance coupled with timely replacements, extends the lifespan of AC unit while reducing energy expenses.

6. Though initially costly, MERV 11 filters provide economic benefits over time due to their efficiency and advantages.

What Are MERV 11 Air Filters

'MERV 11' may appear like nonsense to those outside the air conditioning and heating filter industry. Actually, it stands for Minimum Efficiency Reporting Value, a metric used to indicate how effective these are. Finer filtration is made possible by higher ratings, which allow for the capture of more minute particles.

They are skilled at capturing allergens like pollen, pet dander, and mites, protecting you from irritants. Most materials employ synthetic materials like polyester or pleated paper, some use fiberglass. Its made of polyester and pleated paper outperform their fiberglass counterparts in terms of longevity. 

Additional advantages include resistance against bacterial growth and dampness. Even though you’ll spend more up front, they end up saving money in the long run because they lower power bills and increase the longevity of your Cooling Equipment.

Benefits of MERV 11 Filters

They are made to trap more pollutants, improving the air you breathe in every day. But more than just cleaner air is important—your health is as well. It reduces the amount of allergies and dangerous particles. They have significant advantage.

Here are three primary benefits to consider:

1. Better Air Quality: They remove more particles than ones with lower ratings, intercepting dust, pollen, even certain bacteria, assuring purer air in your living or work environment.

2. Decreased Energy Consumption: They contribute to maintaining optimal airflow, reducing the burden on your heating and cooling unit, leading to reduced usage – hence, lower electric bills.

3. Economical: They could be a little more expensive than those with lower capacity, but over time, the positive things they offer—improved health, make them a more affordable option. Essentially, by using it, you are prioritizing your fitness and well-being in addition to the effectiveness of your AC.

In essence, you are not only investing in your HVAC, you're also prioritizing your self and well-being.

Installation Tips for MERV 11 Filters

A successful installation is vital. Should you encounter any hurdles during this DIY endeavor, fear not, as we're here to help.

Let's explore three essential steps for proper filter installation:

1. Positioning: Place it in your heating's filter cabinet, which is typically located just before the blower. Pay attention to the arrow that shows airflow direction - it should be pointing towards the blower. Failing to position it correctly can lead to decreased effectivity in your system.

2. Sealing Process: When it is in its correct position, seal up the cabinet door firmly. Any gaps in the seal can let unfiltered air pass, which lessens its effectivity.

3. Post-installation Check: Turn on the furnace after installation. Be alert for any unexpected sounds or noticeable decrease in airflow, as these might indicate a faulty installation. If any such anomalies are spotted, switch it off immediately and reassess your installation.

What Are The Common Mistakes In Filter Installation 

Every filter has an arrow that indicates the direction of airflow. If this arrow is not pointing towards the air handler, it means it is installed backwards, which can lead to reduced performance and potential damag.

Using the incorrect size is another frequent error. An improper fit could allow air to bypass and bring dirt and debris into the handler, causing a build-up of dirt. Moreover, a smaller one may be drawn into the system, whilst a larger one may create spaces for unfiltered air to flow through.

Another error that is frequently made during installation is improper sealing. Improper sealing might cause unclean air to seep through rather than through, lowering indoor air and putting more stress on the HVAC system.

Finally, a typical mistake is neglecting to clean or replace it on a regular basis. Molds and other particles build up over time, preventing airflow and making the system work harder to heat or cool your house. This may shorten the life of your air conditioner in addition to raising your consumption rates. As a result, it's critical to frequently clean or replace disposable ones.

Proper Maintenance of MERV 11 Filters

After successful installation, you have to maintain it properly its efficiency and longevity. Regular upkeep extends its life, promoting cleaner air for prolonged periods.

Inspect them regularly. If your household has high irritant levels or furry friends, frequent checks could be necessary. Replacing it is necessary when it appears darkened or clogged. Ignoring these signs isn't advisable as a fully blocked filter forces your system to exert more, resulting in heightened costs and reduced system lifespan.

MERV 11 filters shouldn't be cleaned, but rather replaced every 3 months or earlier if visibly unclean. Allocating resources to this minor expense aids in maintaining clean air and efficient system operation.

Frequently Asked Questions

Does a MERV 11 Filter Affect My HVAC Systems Energy Efficiency?

More energy is required to force air through such filters, potentially reducing the overall lifespan of the system. Moreover, improper installation could result in suboptimal operation.

How Often Should I Replace My Air Filter?

Change it every every 3-6 months is a good practice. Factors such as frequency of use can affect their lifespan. Don't forget, installing these filters isn't difficult, but regular replacement is essential to maintain optimal performance.

Can MERV 11 Filters Remove Allergens and Bacteria Effectively?

Yes it has the capacity to eliminate airborne pollutants quickly. It has high particle-capturing performance, ensuring longer intervals before necessitating replacement, leading to consistently cleaner air.

Are These Filters Suitable for Homes With Pets?

Yes they prove beneficial for households that have pets. Their durability limits the potential damage from dander on HVAC systems. These filters contribute to maintaining clean air and smooth operation of systems.

What Is the Cost Difference Between MERV 11 Filters and Other MERV Rated Filters?

They command a slightly higher price, attributed to their extended longevity and exceptional filtration. Their cost, however, doesn't significantly exceed that of other MERV filters. Such an investment proves worthwhile.

Here is the nearest branch location serving the Stuart area…

Filterbuy HVAC Solutions - West Palm Beach FL

1655 Palm Beach Lakes Blvd ste 1005, West Palm Beach, FL 33401

(561) 448-3760


Here are driving directions to the nearest branch location serving Stuart...

Leave Message

Required fields are marked *